A solvent-free structural epoxy mortar is based on a modified epoxy resin and special hardeners that are two-component, thixotropic and suitable for application at 5 to 25 ° C.
This material is designed according to ASTM C881 standard type 2, 1 and 4 and class 3 and can be applied in all horizontal and vertical sections of various structures.
How to use ABADUR MP-5-25 epoxy mortar
The amount of consumption depends on the pores in the surface. On average, 1500 to 1600 grams of ABADUR MP-25/25 will be required to apply one square meter of epoxy mortar with a thickness of 1 mm.
Epoxy mortar application surfaces must be free of any grease, dust, oil and rust. Prepare the desired surface with sandblasting machine or special tools and remove loose and unstable parts of concrete. The minimum bond strength of concrete should be 1.5 MPa. Metal surfaces must be prepared by mechanical tools such as sandblasting to a degree of 2.5 Sa.
Surface preparation should not be done under the following conditions:
When the surface temperature is less than 3 degrees Celsius above the dew point.
The ABADUR MP-5/25 comes in two separate packages. Always mix the two packages thoroughly. The mixture should be applied at the mentioned time of use (Pot Life). Continue mixing for three minutes to obtain a homogeneous mixture. Make sure that the ingredients are mixed on the sides of the container. To apply this material in a thin layer, mix the resulting mixture with a flat trowel or comb. Run on the surface. Thick material execution is best done by molding.
The exotherm of the epoxy curing reaction may cause the temperature to rise, causing a loss of performance. To prevent this, pour the mixture into shallow containers or start running in the very first minutes.
This mortar is designed to run in the temperature range of 5 to 25 degrees Celsius. Avoid running it at temperatures below 5 ° C and above 25 ° C.
Never dilute the mixture.
Avoid applying mortar when the wind speed is more than 7 meters per second.
Avoid applying mortar when the surface temperature is less than 5 ° C.
Applications of ABADUR MP-5-25 epoxy mortar
ABADUR MP-5-25 epoxy mortar can be used as a structural adhesive for bonding all types of concrete surfaces, natural stone, ceramic, wood, brick, glass and iron. Also, this product is used to repair concrete and increase building reinforcement. It has applications.
ABADUR MP-5-25 epoxy mortar can cover the surface of cracks in order to perform injection operations. This product is also capable of planting reinforcement, planting dowels and bolts in concrete and stone.
Properties and effects of ABADUR MP-5-25 epoxy mortar
Extreme adhesion to a variety of surfaces
Easy mixing and execution
Excellent thixotropic properties, flaky and suitable for running on vertical and overhead surfaces
Suitable for running on dry and wet concrete sections
High initial and final mechanical strength
Hardening without shrinkage
Resistant to chemicals and abrasives
Natrava against moisture and water vapor
No need for primer
Physical and chemical properties of ABADUR MP-5-25 epoxy mortar
Physical state: dough
Color: component A white, component B black
Specific gravity: 1.5 ± 0.1 g / cm ³
Component ratio: (2: 1) A: B
Solid percentage: 100
Compressive strength: (80) N / mm2
Flexural strength: (35) N / mm2
Tensile strength: (20) N / mm2
Adhesion to concrete: (2 / 5-3) N / mm2 (more than concrete adhesion)
ABADUR MP-5-25 Epoxy Mortar Notes
Shelf life: six months in the original packaging
Storage conditions: container in a closed place, away from moisture, frost and direct sunlight
Best storage temperature: +10 to +30 degrees Celsius
Type of packaging: 4 kg total (component A 2.67 kg bucket and component B 1.33 kg bucket)