Multi-purpose epoxy mortar is a type of repair and reinforcing mortar that is the basis of solvent-free epoxy resin and can be supplied as a two-component thixotropic. The special chemical components used in the formulation of multi-purpose epoxy mortar provide the ability to work in all horizontal and vertical sections inside and outside the structures. Multi-purpose epoxy mortar is controlled according to the following standards.
Special remover is a powder mixture based on cement and fibers, which due to the presence of concrete adhesive in its structure, in addition to high adhesion to various surfaces and materials, especially concrete, also provides sealing of the section used.
According to the standard EN1504, issues related to the restoration of concrete structures are divided into several sections, the most important of which are periodic repairs, maintenance instructions and restoration of damaged parts of concrete due to operating conditions.
ABAREPAIR-F is one of the cement repair materials in the design of which polymer fibers are used. The design of this material is such that in addition to high adhesion to a variety of surfaces and materials, especially concrete, it can be used to repair cement sections in large dimensions and up to 50 mm thick.
A solvent-free structural epoxy mortar is modified on the basis of epoxy resin and has special hardeners that are two-component and thixotropic and suitable for application at temperatures of 25 to 45 degrees Celsius.
SMOOTHER is a type of cement mortar modified with polymer additives, along with adhesive reinforcers and mineral fillers, and can be used only by adding ready-made water. This material is used to fill pores and remove fine surface cracks. Due to its high adhesion and filling properties, osmosis is a suitable material for preparing and leveling surfaces before applying coatings with high properties.